There are two different ways to copy file-s (waypoints with tasks, airspace's, etc...) on your Oudie:


1. Trough SeeYou Mobile Wizard in SeeYou:

  • Connect Oudie to PC by supplied USB cable (if you see TFAT folder you have successfully connected the Oudie to PC).
  • Open waypoint (or airspace) file in SeeYou.
  • Run SeeYou Mobile Wizard to transfer airspace's, waypoints and task(s). File > SeeYou Mobile Wizard > Next > choose Copy to Oudie > choose region (just drag a rectangle to define region with task, waypoints or airspace) > Next > SeeYou will automatically copy .cup waypoints file or .cub for airspace file on your Oudie.
  • Safely disconnect Oudie from PC and run the Oudie 3 software. Then go to Menu > Settings > Files > Waypoints > "..." > Select your waypoint file > Active > close all dialogs with OK.
  • We strongly recommend that you remember this setting with Menu > Next > Save Settings > Save Profile > Yes.
  • That is all. You are now using new waypoints/airspace file.


         


2. Directly to Oudie root:

  • Connect Oudie to PC with supplied USB cable. (if you see TFAT folder you have successfully connected the Oudie to PC).
  • Copy waypoint file (.cup) to the folder Waypoints or Oudie root - supported formats are .CUP and .WPT and some other less common formats.
  • Safely disconnect Oudie from PC and run the Oudie 3 software. Then go to Menu > Settings > Files > Waypoints > "..." > Select your waypoints file > press Active and close all dialogs with OK.
  • We strongly recommend that you remember this setting with Menu > Next > Save Settings > Save Profile > Yes.
  • That is all. You are now using your new waypoints.