To turn the Oudie 3 ON press the power button for 1 second. In order to prevent turning on the device by accident you have to press the confirm button in five seconds. 


To turn the Oudie 3 OFF go to Menu > Next > Exit > Yes . Once Oudie 3 software is turned on, press  the power button for 1 second while the device is running then choose the desired action: 

  • Power Off: will stop the navigation and turn off the device. You should do this before long term storage. Battery should be at least 50% full before you store it for a long time.
  • Sleep: will turn off the screen, GPS, Bluetooth and power down the processor. The navigation will be put on hold and the battery will drain very slightly. After switching back on you are ready for navigation in just a few seconds. You should use the Sleep function when you are waiting to launch and want to conserve the battery for example. It's ok to use Sleep over night as well. The battery drain is negligible.
  • Cancel: will do nothing and return focus to navigation. 


To reboot press the reset button on the back of the device.


Note: Before you do Power Off make sure that you saved all new settings!